White LED (User nonreplaceable parts. When replacement is required, contact your local distributor.)
ÈÖµµÁ¶Á¤
16 Levels (Adjusted with the touch panel or the software)
¹é¶óÀÌÆ® Æò±Õ¼ö¸í
50,000 hrs. or more (continuous operation at 25¡ÆC [77 ¡ÆF] before backlight brightness decreases to 50%)
Ç¥½Ã ¹®ÀÚ Á¾·ù
Japanese: 6,962 (JIS Standards 1 & 2) (including 607 non-kanji characters) ANK: 158 (Korean fonts, Simplified Chinese and Traditional Chinese fonts are downloadable.)
FLASH EPROM 32 MB (including a logic program area)
¹é¾÷ ¸Þ¸ð¸®
SRAM 320 KB (Replaceable Lithium battery for backup memory)
½Ã°£ Á¤È®µµ
¡¾65 sec/month (deviation at room temperature and power is OFF)*3
ÅÍÄ¡ÆгΠ¹æ½Ä
Resistive Film (analog)
ÅÍÄ¡ÆгΠºÐÇØ´É
1,024 x 1,024
ÅÍÄ¡ÆгΠ¼ö¸í
1,000,000 times or more
ÀÎÅÍÆäÀ̽º
½Ã¸®¾ó(COM1)
RS-232C Asynchronous Transmission Data Length: 7 or 8 bits, Parity: none, Odd or Even, Stop Bit: 1 or 2 bits, Data Transmission Speed: 2,400 bps to 115.2 kbps, Connector: D-Sub9 (plug)
½Ã¸®¾ó(COM2)
RS-422/485 Asynchronous Transmission Data Length: 7 or 8 bits, Parity: none, Odd or Even Stop Bit: 1 or 2 bits, Data Transmission Speed: 2,400 bps to 115.2 kbps, 187.5kbps (MPI) Connector: D-Sub9 (plug)
ÀÌ´õ³Ý (LAN)
IEEE802.3i/IEEE802.3u, 10BASE-T/100BASE-TX Connector: Modular jack (RJ-45) x 1
USB (TYPE-A)
Conforms to USB2.0 (TYPE-A) x 1, Power Supply Voltage: DC 5 V ¡¾5 %, Output Current: 500 mA or less, Communication Distance: 5 m [16.4ft.] or less
USB (mini-B)
Conforms to USB2.0 (mini-B) x 1, Communication Distance: 5 m [16.4ft.] or less
SDÄ«µå
SD Card Slot x 1
Other font sizes can be set up with the Editor software.
Up to 60,000 steps can be converted in software. However, this reduces application memory capacity (for screen data) by 1 MB.
Depending on the operating temperature and age of unit, the clock can deviate from -380 to +90 sec/month. For systems where this level of deviation is a problem, the user should monitor and make adjustments when required.
ÀϹݻç¾ç
ÇؿܾÈÀü±Ô°Ý
Á¤°ÝÀü¾Ð
DC 24 V
Àü¾ÐÇã¿ë¹üÀ§
DC 19.2 to 28.8 V
Çã¿ë ¼ø°£Á¤Áö ½Ã°£
10 ms or less
¼Òºñ Àü·Â
17 W or less
µ¹ÀÔÀü·ù
30 A or less
Àý¿¬³»·Â
AC 1,000 V 20 mA for 1 min (between charging and FG terminals)
Àý¿¬ÀúÇ×
DC 500 V, 10 M¥Ø or more (between charging and FG terminals)
»ç¿ëÁÖÀ§¿Âµµ
0 to 55 ¡ÆC [32 to 131 ¡ÆF]
º¸Á¸ÁÖÀ§¿Âµµ
-20 to 60 ¡ÆC [-4 to 140 ¡ÆF]
»ç¿ëÁÖÀ§½Àµµ
10 to 90 % RH (Wet bulb temperature: 39 ¡ÆC [102.2 ¡ÆF] or less - no condensation.)
º¸Á¸ÁÖÀ§½Àµµ
10 to 90 % RH (Wet bulb temperature: 39 ¡ÆC [102.2 ¡ÆF] or less - no condensation.)
IP65f NEMA #250 TYPE 4X/13 (on the front panel when properly installed in an enclosure)*4
³Ã°¢¹æ½Ä
Natural air circulation
¹«°Ô
2.5 kg [5.5 lb] or less (display unit only)
¿ÜÇüÄ¡¼ö
W315x H241x D56 mm [W12.4 x H9.49 x D2.2 in.]
ÆгΠÄÆ Ä¡¼ö
W301.5 x H227.5 mm [W11.87 x H8.96 in.], Panel thickness area: 1.6 to 5 mm [0.06 to 0.2 in.]*5
The front face of the GP unit, installed in a solid panel, has been tested using conditions equivalent to the standards shown in the specification. Even though the GP unit's level of resistance is equivalent to these standards, oils that should have no ef
Regarding dimensional tolerance, everything +1/-0 mm [+0.04/-0 in.] and R in angle are below R3 [R0.12 in.]. Even if the installation wall thickness is within the recommended range for the "Panel Cut Dimensions", depending on wall's material, size, and installation location of GP unit and other devices, the installation wall could warp. To prevent warping, the installation surface may need to be strengthened.